Natural Body & Room Spray
All Natural, Microemulsion spray. This milky white, water-based formulation requires an exceptionally low amount of SurfPro Surfactin to disperse fragrance or essential oils in water. The glycerin acts as a solvent for the surfactant system and is required in such a small quantity that there is no tacky feel after drying. This formulation can be adapted to carry a higher oil load by increasing the surfactin/glycerin fraction.
Natural Body & Room Spray |
Formula
|
Percent |
Grams |
Ounces |
Ingredient |
Phase A |
0.2 |
0.4 |
0.014 |
|
|
5.0 |
10.0 |
0.353 |
|
Phase B |
3.0 |
6.0 |
0.212 |
Fragrance Oil |
Phase C |
91.6 |
183.2 |
6.462 |
Distilled Water |
|
0.20 |
0.40 |
0.014 |
- Slowly add SurfPro Surfactin to glycerin while mixing until uniformly incorporated.
- Slowly add Phase B ingredients to Phase A in 1-2g increments with high speed mixing until smooth and uniform. Oil phase must be added slowly; if oils start to pool, stop addition and mix until incorporated. Increase mixing speed as viscosity increases and using sweeping motion when necessary. It should form a highly viscous gel.
- Add Phase C ingredients to the gel with high speed mixing. To reduce foaming avoid entraining air into the mixture when mixing. The final product will be a milky white liquid and single phase.
Makes 200g (7.05oz) of product.
INCI: Water, Sodium Surfactin, Glycerin, Fragrance Oil, Silver Citrate and Citric Acid.
Lotioncrafter 2018 All Rights Reserved
Ingredients in bold are carried by Lotioncrafter